Velleman DVR4MQAE - Manual (Page 9)

DVR4MQAE - 9 - VELLEMAN
There are 4 options available in the main menu:
RECORD -------- Record mode setup.
TIMER ----------- Timer recording setup.
DATE ------------- System date setup.
ADVANCE ------- Advance functions setup.
Use the following buttons to set the menu:
“▲▼◄►“ to move the cursor.
“＋, －” to choose the numbers / selections.
“ENTER“ to go to the submenu / to confirm the selection
“MENU“ to go to the menu OSD / to confirm the change / to exit the menu OSD
b.
Main Menu Options: RECORD
Move the cursor to “RECORD” and press ”ENTER”. The screen will show the following
options:
1. MANUAL RECORD ENABLE:
Start / stop the manual recording function.
2. EVENT RECORD ENABLE:
Start / stop the event recording function. When this function is activated, the recording will be triggered by motion
or external alarm.
3. TIMER RECORD ENABLE:
Start / stop the timer recording function.
4. OVERWRITE:
Select to overwrite the previous recording video in the HDD. When the HDD is full under O/W recording mode,
previous recorded files will be overwritten without further warning notices.
5. RECORD IMG SIZE:
There are two recording options: FRAME & CIF. When changing the recorded image size, stop the recording first.
6. RECORD QUALITY:
There are four quality settings: BEST, HIGH, NORMAL & BASIC
(MENU)
RECORD
TIMER
DATE
ADVANCE
RECORD
MANUAL RECORD ENABLE
EVENT RECORD ENABLE
TIMER RECORD ENABLE
OVERWRITE
RECORD IMG SIZE
RECORD QUALITY
MANUAL RECORD IPS
EVENT RECORD IPS
TIMER RECORD IPS
TOTAL IPS SHARE
(MENU)
RECORD
TIMER
DATE
ADVANCE