Velleman DVR4MQAE - Manual (Page 34)

DVR4MQAE - 34 - VELLEMAN
Step 6: After installation, please type the IP address of your DVR into the URL address box and press “ENTER”. You
will see the login page. Key in the “username” and “password”.
h.
GPRS (depending on your mobile phone type)
GPRS function Installation and Viewing (Take Motorola 768i as an example)
1.
Your mobile service provider must have GPRS service, and the phone handset needs to support GPRS and Java
MIDP 2.0 to run the application.
2. Connect to the website http://211.22.74.18 via the web browser of your cell phone (make sure that your GPRS
function is working).
3. Download and install “4CH_MPEG-4”.
4. After installation, the “4CH_MPEG-4” icon will appear on the desktop of the phone.
5. Click the icon of the “4CH_MPEG-4” video server to enter the setting frame. Type in IP address, port, username
and password of the DVR. Press the “Connect” button.
6. After having connected to the “4CH_MPEG-4” video server, you will see AP interface shown on the screen and
will see “Online” on title.
7. Wait 3 minutes for the video signal to appear.
8. After video signal is shown, you can monitor and control your security system any time and anywhere.
NOTE: It’s not suggested to set the DVR port as 80 port because some telecommunication service provider may
regulate 80 port.
i.
Optional Peripherals
For the operation of the following peripherals, please refer to their manual individually.
1.
IDA (independent disk array).
2. VGA connector.