Velleman DVR4MQAE - Manual (Page 17)

DVR4MQAE - 17 - VELLEMAN
l. Advance Menu: NETWORK
Move the cursor to the “NETWORK” and press ”ENTER”. The screen will show the following options:
1.
NETWORK TYPE (STATIC):
Select NETWORK TYPE and press “＋” or “－” button to set the network type as STATIC. Press “ENTER” to go
to the submenu of the network. In the submenu of network type, use “＋” or “－” button to set all the information
needed in the DVR. See below.
2. NETWORK TYPE (DHCP):
This DHCP function needs to be supported by router or modem network cable with DHCP service. For detailed
DHCP setting, refer to “10.f. Licensed Software AP”.
3. NETWORK TYPE (PPPoE):
This PPPoE function needs to have “username” and “password” from ISP supplier.
For detailed PPPoE setting, refer to “10.f. Licensed Software AP”.
NOTE: DHCP and PPPoE network types need to apply DDNS service to get “Hostname” to correspond to dynamic
IP address. For detailed DDNS setting, refer to “10.f. Licensed Software AP – DDNS”.
m.
Advance Menu: BACKUP
Move the cursor to the “BACKUP” and press ”ENTER”. The screen will show the following options:
Select “USB BACKUP” and press “ENTER”.
1. START TIME:
Select the start time of the backup.
2. END TIME:
Select the end time of the backup.
NETWORK
NETWORK TYPE STATIC
DNS 192.168.001.010
PORT 8 0 0 0
STATIC
IP 192.168.001.010
GATEWAY 192.168.001.0 → 255
NETMASK 252.252.252.000
BACKUP
USB BACKUP
USB BACKUP
START TIME 2005-10-27 11 : 25 : 46
END TIME 2005-10-27 11 : 50 : 58
AVAILABLE SIZE 0512 MB
CHANNEL 05
HDD NUM MASTER
BACKUP TO USB START