Velleman DVR4MQAE User Manual
Page 5
DVR4MQAE
- 5 -
VELLEMAN
b.
Getting Started
1.
Before using the DVR, have the HDDs installed (refer to Appendix #1 for the installation of the HDDs).
2.
Connect the AC power cord to the power adapter and plug into an electrical outlet. The standby LED light will turn
to red. Press the POWER button. The power LED will be red. It takes approximately 10 to 15 seconds to boot the
system.
Hold the POWER button until the red POWER LED turns green. After some time the green turns red again.
3.
Before operating the DVR, please set up the system time first (for setting system time, please refer to “9.d. Date”
settings).
↓
↓
↓
↓
SYSTEM INIT…
1 2 3 4
OK
AUDIO
OK
AUDIO M
OK
DETECTING MASTER HDD
OK
DETECTING SLAVE HDD
FAIL
VERSION 1039-09-H6-04-AA-08
SYSTEM NTSC
- 783 -