Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Speed Control- Banks Brake with CBC-SmartLock '04-07 - Manual (Page 41)

97055 v.8.0
41
16.
Remove the chrome bezel nut
from the Switch shaft. Insert the
Switch shaft into the hole that was
drilled in the dash panel. Re-install the
chrome bezel nut.
17.
Reconnect any electrical
connectors and re-install the
instrument panel(s).
18.
Plug the Switches’ Connector
into the Banks CBC/SmartLock Wiring
Harness Switch Connector.
19.
Route all wiring away from any
pedals or other moving components.
Using the supplied cable ties, secure
the wiring under the dash. Secure all
wiring under the hood away from heat
sources, moving parts, or sharp edges.
20.
Re-install the battery ground
cable(s).
-eND SeCtIoN 7-
Figure 46 Brake enable Switch
Figure 47 overdrive Disable Switch