Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Tuner- Six-Gun Diesel Tuner w_Optional Banks Brake & Speed-Loader '03-07 For use with Six-Gun_EconoMind Selector Switch - Manual (Page 16)

16
96808 v.14 .0
Mounting The Six-Gun/EconoMind
Diesel Tuner
20.
2003-04 model year vehicles only:
Remove the clip shown in Figure 12
to create adequate room to mount the
Six-Gun/EconoMind Diesel Tuner to the
driver side inner fender.
21.
2003-04 four-wheel drive
vehicles: The module shown in Figure
13 will appear only in four-wheel-
drive vehicles. This may need to be
relocated to make room for the Six-
Gun/EconoMind Diesel Tuner. The
mounting location of this module by
the factory has not been consistent on
early vehicles.
NoTE: Make sure all mounting surfaces
are entirely clean and free of dirt
and oil before mounting the Six-Gun/
EconoMind Diesel Tuner. Clean and
dry as required using a cloth damped
in rubbing alcohol or similar cleaning
solution.
21.
2005-07 model year vehicles only:
Remove the adhesive backing from two
(2) dual-lock fasteners and attach them
to the Six-Gun/EconoMind shield and
the top of the fuse box.
22.
Remove the adhesive backing
from the (2) dual-lock fasteners on the
back of the Six-Gun/EconoMind Diesel
Tuner and affix the tuner to:
2003-04 model year vehicles: The inner
driver side fender as shown in Figure 3
Note: Shield will not be used for
installations on 03-04 models. Shield
will only be used on 05-07 models.
2005-07 model year vehicles: The inside
roof of the Six-Gun/EconoMind shield,
that is mounted on the fuse box cover
as shown in Figure 4 & 6.
WARNING: The use of Banks Brake
is for use with installed Six-Gun/
EconoMind Tuner Package with
power level selector switch only.
-END, SEcTION 1-