Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Power Pack & Stinger System & EconoMind, '06-07 Compatible with Banks iQ - Manual (Page 4)

4
96822 v.4.0
Tools Required:
•
1 ⁄ 4 ” and 3 ⁄ 8 ” drive ratchets
• Inch and metric deep sockets
• Ratchet extension
• Metric combination or open-end
wrenches
• Phillips and flat blade screwdrivers
• Standard and needle-nose pliers
• Pocket or X-Acto knife
• Clean shop towels or rags
• Drill bit set
• Drill motor
• Tap Handle
•
1 ⁄ 4 ” NPT tap
• 5 ⁄ 16 nut driver
• Pliers
• Torx bits
• Pry-bar
Highly recommended tools and
supplies:
• Multimeter or 12-volt test light
• Heat gun
• Foot-pound torque wrench
• Penetrating oil or light lubricant
spray
• Reciprocating saw
• Inch-pound torque wrench
Table of Contents
General Installation Practices . . . . 5
Section 1 . . . . . . . . . . . . . . . . . . . . . . 6
Monster Exhaust System Installation
Section 2 . . . . . . . . . . . . . . . . . . . . . 13
Techni-cooler Assembly Installation
Section 3 . . . . . . . . . . . . . . . . . . . . . 18
Thermocouple Installation
Section 4 . . . . . . . . . . . . . . . . . . . . . 19
Banks Ram-Air Filter Installation
Section 5 . . . . . . . . . . . . . . . . . . . . . 20
Banks EconoMind Diesel Tuner
Installation
Section 6 . . . . . . . . . . . . . . . . . . . . . 24
Mounting the Docking Station and
connecting the Banks iQ
Section 7 . . . . . . . . . . . . . . . . . . . . . 26
Power Selector Switch Installation
Section 8 . . . . . . . . . . . . . . . . . . . . . 29
Optional Gauge cluster Installation
Section 9 . . . . . . . . . . . . . . . . . . . . . 30
Transmission Learnng
Section 10 . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting, EconoMind
Section 11 . . . . . . . . . . . . . . . . . . . . 33
clearing Learned Information
Section 12 . . . . . . . . . . . . . . . . . . . . 33
Removal of the EconoMind Diesel Tuner
Section 13 . . . . . . . . . . . . . . . . . . . . 34
Filter Maintance
Section 14 . . . . . . . . . . . . . . . . . . . . 34
Placement of the Banks Power Decals