Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) Speed Control- Banks Brake, Exhaust Brake System, Late '04-07 For use w_Manual Transmissions - Manual (Page 13)

97232 v.3.0
13
11.
Slide the V-clamp that is on the
Brake assembly onto the turbo outlet.
Make sure that the flanges on the
Banks Brake and the turbo’s outlet
are centered in the V-clamp. Loosely
tighten the clamp.
12.
Clamp the Brake and exhaust
pipe together with the V-clamp that
was placed over the exhaust.
Note: If the exhaust support was
removed, a block of wood on a jack
or a friend may help in lining up the
exhaust pipe to the Banks Brake
easier.
13.
Tighten the V-clamps.
14.
If the exhaust support was
removed, re-attach it to the
transmission.
15.
Reinstall the wheel wells, tires
and lower the truck to the ground.
-END SECTION 2-