Assembly, Chapter 3 assembly, Control rod handle assembly diagram – Grain Systems Unload Augers PNEG-790 User Manual
Page 11
Advertising
Pneg - 790 Commercial Bin Well Control Rod Kits & Rack & Pinion Controls
11
2. ASSEMBLY
Control Rod Handle Assembly Diagram.
Figure 2A
5/16'' Nut
5/16'' Lockwasher
5/16'' Flatwasher
Gate Control Clamp
5/16'' x 1-3/4'' Roll Pin
5/16'' x 3/4'' Carriage Bolt
5/16'' Hex Nut
1.2'' Control Rod
5/16'' x 2'' Long Hex Head Bolt
Control Rod
Note: All 5/16'' Nuts must be installed so that the 5/16'' x 1-3/4'' long roll pin is secured.
Advertising