Grain Systems Unload Augers PNEG-790 - Manual (Page 7)

Pneg - 790 Commercial Bin Well Control Rod Kits & Rack & Pinion Controls 7
1. SAFETY
Follow Safety Instructions
Carefully read all safety messages in this manual and
safety signs on your equipment. Keep signs in good
condition. Replace missing or damaged safety signs. Be
sure new equipment components and repair parts
include the current safety signs. Replacement safety
signs are available from the manufacturer.
Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
Keep your machinery in proper working condition.
Unauthorized modifications to the machine may impair
the function and/or safety and affect machine life.
If you do not understand any part of this manual and need
assistance, contact your dealer.
Read and Understand
Manual
Keep Hands Away from Moving Parts
Keep hands and feet away from auger intake and other moving
parts. Rotating auger can sever a person's limbs or even kill.
Keep hair, loose clothing, and shoestrings away from rotating
and moving parts. NEVER wear loose fitting clothing when
working around augers.
ALWAYS turn off and lock out all power sources before servicing
equipment.
Rotating Auger
ALWAYS keep belt and chain guards in place during operation.
NEVER attempt to assist machinery operation or to remove trash
from equipment while in operation.
Operate Motor Properly
In an emergency, shut down the power source.
Turn off and lock out all power sources before performing any
maintenance.
Do not operate electric motor equipped units until motors are
properly grounded.
Disconnect power on electrical driven units before resetting
motor overloads.
Do not repetitively stop and start the drive in order to free a
plugged condition. Jogging the drive in this type of condition
can damage the auger and/or drive components.
Electrical Shock
Hazard
Practice Safe Maintenance
Understand service procedures before doing work. Keep area
clean and dry.
Never lubricate, service, or adjust machine while it is in
operation. Keep hands, feet, and clothing from rotating shafts,
screws, belts, or other moving equipment.
Keep all parts in good condition and properly installed. Fix
damage immediately. Replace worn or broken parts. Remove
any build up grease, oil, or debris. Maintain Equipment
and Work Area