Grain Systems Tanks PNEG-257 - Manual (Page 51)

9. Leg and Leg Bracing
PNEG-257 12', 15', 18' and 21' Bulk Feed Tanks BFT and GHT Series 51
Installation of Leg to Sidewall
Figure 9D
Use 5/16" x 3/4" bin bolts and nuts when attaching the leg to base. Make sure the washer is used on the
slot side of the leg.
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This
provides for a weather-tight seal at the leg attachment location. (See leg size chart
on Page 54 before
attaching legs.)
Figure 9E