Grain Systems Tanks PNEG-257 User Manual
Page 52
Advertising
9. Leg and Leg Bracing
52
PNEG-257 12', 15', 18' and 21' Bulk Feed Tanks BFT and GHT Series
Installation of Leg to Sidewall for 15', 18' and 21' BFT
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This provides
for a weather-tight seal at the leg attachment location.
NOTE: Insert bolts from inside to outside on all leg to tank connections.
Figure 9F Plug Holes
Figure 9G
Figure 9H Installing legs to bin with bolt heads on the
inside of bin and nuts on the outside.
Advertising