Grain Systems Tanks PNEG-257 - Manual (Page 75)

14. Parts List
PNEG-257 12', 15', 18' and 21' Bulk Feed Tanks BFT and GHT Series 75
12' Diameter 60° Hopper Bin Hardware Specification Parts List
NOTE: Bolt listed first, nut second for each usage.
Ref # Part # Description Qty
1
S-275
Bulk Tank Peak Ring to Roof Panels (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
36
S-396 36
2
S-275
Roof Panel to Roof Panel (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16" Hex Nuts.)
240
S-396 240
3
S-275
Roof Panels to Top Sidewall Sheets (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
144
S-396 144
4
S-275
Vertical Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
S-396 Varies
5
S-275
Horizontal Sidewall Sheet Seams (Use 5/16" x 3/4" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
S-396 Varies
6
S-275
Leg to Sidewall Sheet (Use 5/16" x 3/4" Hex Head Bin Bolts and 5/16" Hex Nuts.)
(Bolt Heads to Inside of Tank)
96 or 168
S-396 96 or 168
7
S-277 Hopper Panels to Sidewall Sheet (Use 5/16" x 1-1/4" Hex Head Bin Bolts
and 5/16" Hex Nuts.) (Bolt Head to Inside at Leg to Hopper to Sidewall
Connection Only.) 288
S-396 288
8
S-277
Leg to Body Sheet to Hopper Connection (Use 10 Gauge Washer Under
5/16" x 1-1/4" Hex Head Bin Bolts and 5/16" Hex Nuts.) (Bolt Head to Inside
at Leg to Hopper to Sidewall Connection Only.)
8
S-396 8
BLK-12483 8
9
S-4303
Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.)
420
S-3611 420
10
S-4303
Hopper Collar to Hopper Panel (Use 5/16" x 3/4" Truss Head Bin Bolts and
5/16" Flanged Whiz Nuts.) (Bolt Heads to Inside of Tank.) (16" Shown)
36
S-3611 36
11
S-7927
Hopper Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
8
S-456 8
12
S-7927
Cross Tie Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
48
S-456 48