Attaching the a-frames to the center collar, Chapter 7: roof assembly – Grain Systems Tanks PNEG-4075G User Manual
Page 102
Table 7-3 For standard roof
Bin Diameter
Peak Capacity
Ground Snow Load
Approximate A-Frame Weight
75 ft. (22.86 m)
50 K
50 PSF
1106 lb (501 kg)
75 ft. (22.86 m)
50 K
50 PSF
1747 lb (792 kg)
(three rafter assembly)
The part variance multiplier is 4%.
Attaching the A-Frames to the Center Collar
The A-frame rafters must be installed to support the center collar and main roof structure.
Before You Begin
The center collar should be assembled and secured to the support pole, and the A-frame rafters should be
assembled. Determine the correct location of each A-frame. For more information, see
. Read and understand the safe and proper lifting procedures needed to install the A-
frames. For more information, see
Guidelines for Assembling and Lifting the A-Frame Rafter Sections,
.
1. Carefully lift the A-frame assembly (A) into position, and align with the proper holes on the center
collar (B).
2. Install flange bolts (C) and flange nuts (D) as shown.
3. Before continuing with the remaining A-frame rafters, secure the A-frame rafter to the eave clip. See
Attaching the A-Frame to the Eave Bracket , page 103
Figure 7-25 Exploded view of A-frame to center collar
102
Pneg-4075G 75 Ft Diameter 40-Series Bin