Grain Systems Tanks PNEG-4075G - Manual (Page 60)

Chapter 6: Stiffeners
Close-Punch Connection for a Base Stiffener (2+2 Ga – 8 Ga) to a
Base Boot
Reference the following information for a close-punch connection for a base stiffener (CTS-2119XX) to a
base boot (CTS-2110XX).
Figure 6-24 Base Stiffener (2+2 Ga – 8 Ga) to a Base Boot Close-Punch Connection
A Close-punch base stiffener (CTS-2119XX)
B Close-punch base Boot (CTS-2110XX)
C 3/8 x 1 Bolt (S-7485)
D 3/8 Nut (S-9426)
E Completed assembly
NOTE: Two-post stiffeners shown. The bolt pattern will
vary for three-post. Only place bolts where
holes in the stiffeners align with holes in the
sidewall sheet.
60 Pneg-4075G 75 Ft Diameter 40-Series Bin