Series 2000 batch fan / heater – Grain Systems PNEG-1314 User Manual
Page 34
Advertising
2003 Top Dry Service School
3 4
Initializing the Novram
•
Turn the Control Power “ off “.
•
Hold down the Program Temperature
switch.
•
Turn the Control Power switch “on “
with the Program Temperature switch
held down.
•
Press the Increase switch until 7 is on
the display.
•
Press the Program Temperature switch
again.
•
You have two seconds to depress the
Increase or Decrease switches at the
same time.
•
The NOVRAM has been initialized.
NOTE: The computer has now been cleared of all
memory, including the type of dryer it is and all
Set-up variables.
Series 2000 Batch Fan / Heater
Advertising