Grain Systems PNEG-1135 - Manual (Page 56)

2001 Top Dry Service School
56
Initializing the Novram
• Turn the Control Power “ off “.
• Hold down the Program Temperature
switch.
• Turn the Control Power switch “on “
with the Program Temperature switch
held down.
• Press the Increase switch until 7 is on
the display.
• Press the Program Temperature switch
again.
• You have two seconds to depress the
Increase or Decrease switches at the
same time.
• The NOVRAM has been initialized.
NOTE: The computer has now been cleared of
all memory, including the type of dryer it is and
all Set-up variables.
Series 2000 Batch Fan / Heater
Software Diagnostics