Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1056 - Manual (Page 19)

- 19 -
Chain
All chain is shipped in approximate 10 foot lengths. The UHMW wiper flights should be in
front of the welded chain flights in the direction of chain travel (see diagram).
Adjust take-up screws to position the take-up sprocket as far from the end of the conveyor as
possible. Assemble all of the sections of chain using the connecting links provided with chain
assembly. With the assembled conveyor mounted in its permanent position, install the chain
assembly in the bottom of the conveyor and wrap chain around the sprocket at the head and tail
of the conveyor. Using a ratchet cable puller, pull the two ends of the chain together. Remove
the unneeded chain and fasten the two ends together using a connecting link furnished with the
chain assembly. Adjust take-up screws to tighten the chain.
81X Chain Assembly 4” Pitch Roller Chain Assembly