Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1056 - Manual (Page 28)

- 28 -
10 Foot Adjustable Bypass Inlets
10 foot adjustable bypass inlets come pre-assembled from the factory. The 10 foot adjustable
bypass inlets are a standard 120 in. conveyor section. The hogback is stationary, with an
adjustable baffle at each side inlet to the bottom chamber of the conveyor. 10 foot adjustable
bypass inlets must be mounted horizontally. If not mounted horizontally, capacity will be
reduced.
10 Foot Adjustable Bypass Inlet
Grate
Grates are shipped from factory in sections.
10’ Adjustable Bypass Inlet Grate