Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1056 User Manual
Page 25
- 25 -
Options
The standard Series I incline conveyors have been designed to meet most conveyor operation
criteria. However, to better serve customer special applications, a number of options are
available for the conveyors. Descriptions of the options, their installation, care and maintenance
will be covered in this section.
WARNING! POWER MUST BE
SHUT OFF AND LOCKED OUT
BEFORE ANY OPTIONS ARE
INSTALLED.
Liner Packages
Bottom A.R. liners come standard with a galvanized cover sheet. The installation is the same
as the standard 8-gage bottom.
Shock Relay
Refer to installation instructions within the shock relay package.
Standard Bypass Inlets
Standard bypass inlets come pre-assembled from the factory. The inlets are a standard 28 in.
conveyor section. The hogback is stationary in standard bypass inlets. Standard bypass inlets
must be mounted horizontally. If not mounted horizontally, capacity will be reduced.
Standard Bypass Inlet