Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1056 User Manual
Page 29
- 29 -
Trouble Shooting
Trouble Shooting Guide
Problem
Cause
Solution
Low Capacity
Improper chain speed
Check the shaft RPM
Improper feed
Check the grain level at inlet
Plugging
Check the discharges
Baffle or adjustable hogback Increase opening
setting too low
Noisy Operation
Loose UHMW Paddles
Check all bolts on chain
Bottom and/or Divider
Check intermediate trough section
not aligned
Joints and make flush
Worn drive components
Check oil level and shaft seals
Belt misalignment; loose belts
Worn chain and/or sprockets Check chain sprockets and chain
Uneven UHMW
Conveyor Misalignment
Check the conveyor alignment
Paddle Wear
Sprocket Slipped
Check set screws on sprockets
Uneven sprocket wear Worn chain
Replace chain
Improper alignment
Check sprocket alignment
Contact your local contractor for added assistance.