Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1128 - Manual (Page 10)

10 PNEG-1128 Chain Loop System without Controls
2. Decals
THE DECALS SHOWN ON THIS PAGE MUST BE DISPLAYED AS SHOWN
Replacements are available upon request. Write to the following address:
GSI Decals
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
NOTE: 1. The decals on this page are not actual size.
2. Keep all decals wiped clean at all times.
3. All decals must be replaced if they are destroyed, missing, painted over or can no longer
be read.
SHEAR POINT
Do not operate with cover open.
Keep clear of moving chain and
paddles.
Do not remove or modify guards.
Disconnect and lockout power
before servicing.
Failure to do so will result in
Serious INJURY or DEATH.
8107001
8107006
MOVING CHAINS AND PADDLES!
THIS BIN IS EQUIPPED WITH A CHAIN LOOP SYSTEM
WHICH CAN KILL OR DISMEMBER.
KEEP CLEAR OF ALL CHAIN AND PADDLES AND
NEVER ENTER THIS BIN UNLESS ALL POWER IS
DISCONNECTED AND LOCKED OUT.
FAILURE TO DO SO WILL RESULT IN SERIOUS INJURY
OR DEATH!
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-994
SHEAR POINT
Keep hands clear of moving
parts. Do not operate with
guard removed. Disconnect
and lockout power before
servicing.
DC-995
WARNING
This decal is provided in
the Owner’s Manual
Packet. Place on the bin
during Installation.
8107001
DC-1379
DC-994 DC-995
8107006