Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1128 - Manual (Page 35)

6. Installation
PNEG-1128 Chain Loop System without Controls 35
Ground Control Kit for Discharge Gates (Continued)
Figure 6R Ground Control Kit Parts
Ground Control Kit Parts List
Ref # Part # Description Qty
1 Bolt-Car, Standard Third-Grade 2 3/8"-16 UNC x 0.75, Plated 2
2 8101157 Bracket-Bin Wall Mount Ground Control Kit 1
3 8101158 Bracket-Control Wheel, Weldment Zinc Plated 8101159 1
4 8101156 Bracket-Pulley Mount, Ground Control Kit 1
5 8101153 Control Wheel - w/ Clamp 90° Discharge w/ Gate 1
6 Lock Nut, Flange, 1/4"-20 UNC (Whiz Lock) Plated 8
7 Lock Nut, Flange, 3/8"-16 UNC (Whiz Lock) Plated 2
8 Cotter Pin, Standard 3/16" x 1-3/4" Long 2
9 Pulley-Hot House, (Nolin Milling No #) 2
10 Screw-MF Flange Whiz Lock 1/4"-20 UNC x 3/4", Plated 8
11 Screw - s/ Drill, WH Hex Head 1/4"-14 x 1", (Tek 3) Plated 12
12 Flat Washer, Standard 3/8", Plated 2
13 Flat Washer, Standard 1", Plated 2