Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1128 - Manual (Page 48)

9. Parts List
48 PNEG-1128 Chain Loop System without Controls
8" and 10" Discharge Gate
Ref # Part # Description Qty
1 8081093 Access Panel-Weldment 8" 90° Discharge with Gate 1
1 8101093 Access Panel-Weldment 10" 90° Discharge with Gate 1
2 8081096 Access Door-Assembly 8" 90° Discharge with Gate 1
2 8101096 Access Door-Assembly 10" 90° Discharge with Gate 1
3 8081097 Slide Gate-Weldment 8" 90° Discharge with Gate 1
3 8101097 Slide Gate-Weldment 10" 90° Discharge with Gate 1
4 8081351 Chain Loop 8" Discharge Gate Rail 2
4 8101501 Chain Loop 10" Discharge Gate Rail 2
5 8081103 Shaft-1" O.D. x 16-1/4" Zinc Plated 8081104 1
5 8101103 Shaft-1" O.D. x 17-3/4" Zinc Plated 8101104 1
6 8101153 Control Wheel - w/ Clamp 90° Discharge w/ Gate 1
7 8081203 Discharge w/ Gate-90, 8" Zinc Plated 8081182 1
7 8101203 Discharge w/ Gate-90, 10" Zinc Plated 8101182 1
8 Lock Nut, 5/16"-18 UNC Nylon Lock, Plated Grade 2 9
9 Lock Nut, Flange, 5/16"-18 UNC (Whiz Lock) Plated 8
10 Lock Nut, Flange, 3/8"-16 UNC (Whiz Lock) Plated 4
11 Hex Bolt, Standard Third-Grade 2 5/16"-18 UNC x 1", Plated 8
12 Hex Bolt, Standard Third-Grade 2 5/16"-18 UNC x 3", Plated 1
13 Screw-Flange Whiz Lock 3/8"-16 UNC x 1/2", Plated 4
14 Screw-Flange Whiz Lock 5/16"-18 UNC x 3/4", Plated 20
15 Key-Square 1/4" x 2" 1
16 PT0134 Bearing-w/ Housing, 1" Bronze Insert, 2 Hole 2
17 PT1088 Sprocket-(Hub Type) 19 Tooth, 1" I.D., #50 1