Audio processor description, Audio processor description -12 – Cobalt Digital COMPASS 9062 Up_Down_Cross Converter User Manual

Page 16

Advertising
background image

1

9062 Functional Description

1-12

9062 PRODUCT MANUAL

9062-OM (V4.6)

Audio Processor Description

The audio processor operates as an internal audio router. The router function
chooses from the following inputs:

16 channels of embedded audio from the SDI video input

Four independent internal tone generators (described below)

Internal Down Mix and Mono Mixer outputs (described below)

Digital silence (mute) setting

The router function provides up to 16 channels of embedded audio on the

SDI

OUT

outputs. The router acts as a full audio cross point. Each of the 16

embedded output channels can receive signal from any one of the 16
embedded input channels, four internal tone generators, or several mixer
outputs. Unused output channels can be mapped to a “Silence” source. Each
output also provides gain adjustment and selectable polarity inversion.

Output audio rates are always 48 kHz locked to output video. (embedded
audio must be nominally 48 kHz input; 32, 44.1, 96, and 192 kHz inputs are
not compatible with the 9062.) Embedded output audio is always precisely
synchronized with the output video.

As set with the default settings, the routing between embedded audio channels
is basic 1-for-1 for the 16 embedded audio channels (with embedded Ch 1
being embedded to embedded Ch 1 at the SDI output, and so on). Other
sources and/or destinations for each channel are selected using the card edge
controls or a remote control system.

Audio Down Mix and Mono Mix Function

(See Figure 1-4.) The Audio Down Mixer function provides for the selection
of any five embedded audio sources serving as Left (

L

), Right (

R

), Center (

C

),

Left Surround (

Ls

), and Right Surround (

Rs

) individual signals to be

multiplexed into stereo pair Down Mix Left (

DM-L

) and Down Mix Right

(

DM-R

). The resulting stereo pair

DM-L

and

DM-R

can in turn be routed and

processed just like any of the other audio sources described earlier.

Figure 1-4 Audio Down Mix Functional Block Diagram with Example Sources

DM-L

L

R

C

Ls

Rs

DM-R

Emb Ch 3

Emb Ch 5

Emb Ch 6

Emb Ch 9

Emb Ch 11

Embed Ch 1 - Ch 16

Advertising