Cobalt Digital COMPASS 9062 Up_Down_Cross Converter - Manual (Page 5)

9062-OM (V4.6) 9062 PRODUCT MANUAL 1-1
Chapter 1
Chapter 1
Introduction
Overview
This manual provides installation and operating instructions for the 9062
Up/Down/Cross Format Converter with HD/SD-SDI Input, Embedded Audio
Support and Frame Sync card (also referred to herein as the 9062).
This manual consists of the following chapters:
• Chapter 1, “Introduction” – Provides information about this manual
and what is covered. Also provides general information regarding the
9062.
• Chapter 2, “Installation and Setup” – Provides instructions for
installing the 9062 in a frame, and optionally installing a 9062 Rear
I/O Module.
• Chapter 3, “Operating Instructions” – Provides overviews of
operating controls and instructions for using the 9062.
This chapter contains the following information:
• 9062 Card Software Versions and this Manual (p. 1-2)
• Manual Conventions (p. 1-3)
• Safety Summary (p. 1-4)
• 9062 Functional Description (p. 1-5)
• Technical Specifications (p. 1-19)
• Warranty and Service Information (p. 1-21)
• Contact Cobalt Digital Inc. (p. 1-22)