9062 functional description, 9062 input/output formats, 9062 input/output formats -5 – Cobalt Digital COMPASS 9062 Up_Down_Cross Converter User Manual
Page 9: 9062 functional description (p. 1-5), Introduction
9062-OM (V4.6)
9062 PRODUCT MANUAL
1-5
Introduction
9062 Functional Description
9062 Functional Description
Figure 1-1 shows a functional block diagram of the 9062. The 9062 format
converter also includes embedded audio support and routing and a full video
frame synchronizer. The 9062 also handles AFD code detection and
processing, timecode insertion, and closed captioning support.
The video source can be either an HD or SD-SDI. The video can be up, down,
or cross-converted to a different format, and aspect ratio can be corrected to
provide proper output aspect.
Note:
Some of the functions described below are available only when using the
DashBoard™, or Cobalt
®
OGCP-9000 or OGCP-9000/CC Control Panels
user interfaces. Refer to User Control Interface (p. 1-15) for user interface
descriptions.
9062 Input/Output Formats
The 9062 provides the following inputs and outputs:
•
Inputs:
•
HD/SD-SDI IN
– dual-rate HD/SD-SDI input
•
Outputs:
•
HD/SD-SDI OUT
– four dual-rate HD/SD-SDI buffered video
outputs
•
RCK OUT
– four dual-rate HD/SD-SDI reclocked buffered video
outputs
•
RS-485
– RS485 Dolby
®
metadata output (with option +LTC, also
provides RS-485 LTC I/O)