Cobalt Digital COMPASS 9062 Up_Down_Cross Converter - Manual (Page 42)

3
9062 Function Submenu List and Descriptions
3-10 9062 PRODUCT MANUAL 9062-OM (V4.6)
Table 3-2 9062 Function Submenu List
Audio Input Controls
Displays signal status for the 16 embedded audio
channels. Also provides global unity routing/parameter
control resets.
• Status Displays Individual signal status displays embedded audio channels 1-16 as
follows:
• Not Present: Indicates embedded channel does not contain
recognized audio PCM data.
Note: Channel displaying Not Present may still carry usable audio
data with Unlocked being displayed due to invalid headers.
• Present, Professional: Indicates embedded channel contains
recognized audio PCM data.
• Present, Consumer: Indicates embedded channel contains audio
PCM data other than professional (for example, S/PDIF).
• Present, Dolby E: Indicates embedded channel contains Dolby ® E
encoded data.
• Present, Dolby Digital: Indicates embedded channel contains
Dolby ® Digital encoded data.
Note: Dolby status displays shown to the left only occur for valid
Dolby ® signals meeting SMPTE 337M standard.
This card does not perform Dolby ® processing on the signal.
Although the card controls will appear to be usable for this
signal tag, the signal is passed with 1-to-1 routing and all
related gain and polarity controls set to unity.
• Embedded Unity Channel Selection Selects unity reset of Embedded Audio Group 1/2 and 3/4 controls and
re-establishes default 1-to-1 routing as follows:
• Embedded: Routes Embedded Ch 1 thru Ch 16 as sources to
destination channels Embedded Ch 1 thru Embedded Ch 16.
• Apply Audio Channel Selection Applies embedded unity channel selection (as set in the above drop-down
lists). To apply the selections, click the Confirm button. When Confirm is
clicked, a Confirm? pop-up appears, requesting confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
For any selection following confirm, the destination channel controls are
default reset as follows:
• Gain is to unity
• Phase control is set to Normal
• Channel is set to Unmuted
•
•
•