Cobalt Digital COMPASS 9062 Up_Down_Cross Converter - Manual (Page 30)

2
Installing a Rear I/O Module
2-4 9062 PRODUCT MANUAL 9062-OM (V4.6)
Figure 2-1 Rear I/O Module Installation
DSCN3483A.JPG
Align and engage mounting tab on Rear
I/O Module with the module seating slot
on rear of frame chassis.
Hold top of Rear I/O Module flush against
frame chassis and start the captive screw.
Lightly tighten captive screw.
DSCN3487A.JPG
1
2