Cobalt Digital COMPASS 9062 Up_Down_Cross Converter - Manual (Page 76)

3
9062 Function Submenu List and Descriptions
3-44 9062 PRODUCT MANUAL 9062-OM (V4.6)
(continued)
Note: • 2.0-to-5.1 upmixer function is an optional licensable feature. This function and its controls appear only when a license
key is entered and activated. Refer to Licensable Features function description on page 3-47 for more information.
• Channel sources used by the upmixer are post-processed signals received from the Audio Routing/Gain Control
function. When active, the channel selections made using this function are directly embedded in the output SDI.
Refer to 2.0-to-5.1 Upmix Function (p. 1-13) in Chapter 1, “Introduction” for detailed functional description and signal
flow.
• For any six channels selected for this function, the Left and Right channel selections always serve as the stereo input
pair.
• 2.0-to-5.1 Up Mixer Selection Separate drop-down lists for Left, Right, Center, LFE, Left Surround,
and Right Surround allow embedded audio source selection, and
embedded channel assignments for the six generated 5.1 channels.
The example below shows selection of embedded channels 1 and 2 as
the received stereo source (Embed Ch1 and Ch 2 for Left and Right
drop-down list selections in the Up Mixer Selection tool).
Using the setup shown in the example, when upmix is active the
embedded channel 1/2 stereo pair is overwritten with the new stereo pair
L/R on channels 1/2. As selected in the example, the additional 5.1
channels C, LFE, Left Surround (Ls), and Right Surround (Rs) overwrite
Emb Ch 3 – Ch 6, respectively.
Table 3-2 9062 Function Submenu List — continued
•
•
•
Emb Ch 1 –
Ch 16
>
Emb Ch 1
Emb Ch 2
Emb Ch 3
Emb Ch 4
Emb Ch 5
Emb Ch 6
L
R
(C)
(LFE)
(Ls)
(Rs)
L – Emb Ch 1
R – Emb Ch 2
C – Emb Ch 3
LFE – Emb Ch 4
Ls – Emb Ch 5
Rs – Emb Ch 6