Installation and setup – Cobalt Digital COMPASS 9085 Loudness Processor User Manual
Page 33
9085-OM (V4.3)
9085 PRODUCT MANUAL
2-7
Installation and Setup
Installing a Rear I/O Module
RM-9085-B
Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Six analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 6)
• Two buffered SDI coaxial outputs (SDI OUT)
RM-9085-C
Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four AES I/O coaxial input/outputs (AES I/O 1 thru
AES I/O 4; I/O function of each connection is
user-configurable)
• Two dedicated AES coaxial audio inputs (AES IN 5
and AES IN 6)
• Two dedicated AES coaxial audio outputs
(AES OUT 1 and AES OUT 2)
• Eight analog balanced audio inputs (AN-AUD IN 1
thru AN-AUD IN 8)
• Two buffered SDI coaxial outputs (SDI OUT)
Note: For AES I/O 1 and AES I/O 2 on
RM20-9085-C Rear I/O Module to function as
inputs, AES I/O switches S11 – S12 must be
set to Input (factory default).
See Setting I/O Switches for AES I/O (1-4)
Ports (p. 2-1) for more information.
Note: AES OUT 1 and AES OUT 2 on RM-9085-C
Rear I/O Module always function as outputs
regardless of whether AES I/O 1 or
AES I/O 2 are used as inputs or outputs.
Table 2-1
9085 Rear I/O Modules — continued
9085 Rear I/O Module
Description