9085 functional description, 9085 input/output formats, 9085 input/output formats -5 – Cobalt Digital COMPASS 9085 Loudness Processor User Manual
Page 9: 9085 functional description (p. 1-5), Introduction
9085-OM (V4.3)
9085 PRODUCT MANUAL
1-5
Introduction
9085 Functional Description
9085 Functional Description
Figure 1-1 shows a functional block diagram of the 9085. The 9085 loudness
processor also includes a full 16-channel audio embedder/de-embedder, an
8-channel, and a 24-bit balanced analog-to-digital audio converter. The 9085
also handles AFD code detection/insertion.
Note:
Some of the functions described below are available only when using the
DashBoard™, or Cobalt
®
OGCP-9000 or OGCP-9000/CC Remote Control
Panels user interfaces. Refer to User Control Interface (p. 1-14) for user inter-
face descriptions.
9085 Input/Output Formats
The 9085 provides the following inputs and outputs:
•
Inputs:
•
HD/SD SDI IN
– dual-rate HD/SD-SDI input
•
AES I/O (1-4)
– user-switchable as AES inputs or AES outputs
•
AES IN (5-8)
– dedicated AES inputs
•
AN-AUD IN (1-8)
– balanced analog audio inputs
•
Outputs:
•
SDI OUT
– two dual-rate HD/SD-SDI buffered video outputs
•
RCK OUT
– two reclocked HD/SD-SDI buffered input copies
•
AES OUT (1-8)
– dedicated AES outputs
•
AES I/O (1-4)
– user-switchable as AES inputs or AES outputs
Note:
The input/output complement listed above represents the maximum capability
of the 9085. The practical input/output complement is determined by the par-
ticular Rear I/O Module used with the 9085. Refer to 9085 Rear I/O Modules
(p. 1-16) for more information.