Cobalt Digital COMPASS 9085 Loudness Processor - Manual (Page 82)

3
Example Setups Using The 9085 and DashBoard™
3-44 9085 PRODUCT MANUAL 9085-OM (V4.3)
In the example here, Embedded Channels 1 thru 6 are de-embedded from the
input SDI data and routed to discrete AES channels 1 thru 6. Also, two analog
inputs are routed to AES channels 7 and 8. Figure 3-6 (sheet 2) shows the
9085 control settings that result in this routing.
Figure 3-6 Audio Routing Example (Sheet 2 of 4)
ALP_AUD_ROUTE_EX1.PNG
AES Ch 1
AES Ch 2
AES Ch 3
AES Ch 4
AES Ch 5
AES Ch 6
AES Ch 7
AES Ch 8
Embed Ch 1
Embed Ch 2
Analog
Ch 1
SDI IN
Audio
De-Embed
Embed Ch 3
Embed Ch 4
Embed Ch 5
AN-AUD IN 1
AN-AUD IN 2
AES OUT 1
AES OUT 2
AES OUT 3
AES OUT 4
Analog
Ch 2
9085
To
Console
Embed Ch 6
Using the AES Audio Out
Pairs 1-4 function, the
Source selections shown
above route the selected
sources to discrete AES
channels 1 through 8. These
discrete outputs are then
available on the 9085 card
Rear I/O Module AES OUT 1
thru AES OUT 4 BNC
connectors to be fed to the
console.