Operating instructions, Example setups using the 9085 and dashboard – Cobalt Digital COMPASS 9085 Loudness Processor User Manual
Page 83
![background image](/manuals/280003/83/background.png)
9085-OM (V4.3)
9085 PRODUCT MANUAL
3-45
Operating Instructions
Example Setups Using The 9085 and DashBoard™
The discrete AES audio on AES channels 9 thru 16 is now re-embedded using
the 9085 control settings shown in Figure 3-6 (sheet 3).
Figure 3-6 Audio Routing Example (Sheet 3 of 4)
9085_AUD_ROUTE_EX3A.PNG
9085_AUD_ROUTE_EX3B.PNG
• • •
Audio
Embed
SDI OUT
9085
AES IN 5
AES Ch 9
AES Ch 10
AES Ch11
AES Ch 12
AES Ch 13
AES Ch 14
AES Ch 15
AES Ch 16
Embed Ch 1
Embed Ch 2
Silence
AES IN 6
AES IN 7
AES IN 8
Embed Ch 3
Embed Ch 4
Embed Ch 5
Embed Ch 6
Embed Ch 7
Embed Ch 8
Embed Ch 9 –
Embed Ch 16
From
Console
Loudness
Processing
Using the Embedded Audio
Group 1/2 and 3/4 functions,
the Source selections shown
above route the discrete AES
audio signals received from the
console on Rear I/O Module
AES IN 5 thru AES IN 8 BNC
connectors to Embedded
Audio Group 1/2 embedded
channels 1 thru 8.
Unused Embedded Audio
Group 3/4 embedded channels
9 thru 16 are set to Silence
(mute).