Accessing the 9085 card using a cobalt, Accessing the 9085 card via remote control, Remote control panel – Cobalt Digital COMPASS 9085 Loudness Processor User Manual
Page 44: Press the
3
Accessing the 9085 Card via Remote Control
3-6
9085 PRODUCT MANUAL
9085-OM (V4.3)
Accessing the 9085 Card Using a Cobalt
®
Remote Control Panel
Press the
Select Device
key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9085_DB_ACCESS3A3.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example, “1 9085 - Post 1A
Loudness Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
9085_3366_3392.JPG