TC Electronic Nova System - Manual (Page 12)

MENU - ROUTING
12
Serial
The Serial routing connects all effect blocks “in a straight line”. This means that each effect block affects the following
effect(s).
If a delay with a long delay time is used in combination with a reverb, you may find the added reverb on the delay
repeats disturbing. In that case, use either the Semi Parallel or Parallel routing.
Routing
NOVA System has three ways of routing the chain of effects: Serial, Semi Parallel and Parallel.
Basics
• Press MENU
• Select Routing using encoder D
• Press MENU to confirm
• Set values using encoders A, B and C
• Change pages using encoder D
• Confirm by pressing MENU
• Exit by pressing MENU again