TC Electronic Nova System - Manual (Page 9)

9
1 - Drive Input
Input for guitar. Use this input to utilize the programmable
analog drive section of NOVA System.
Connection type: 1/4” jack.
2 - Line Input
In case you want to use the NOVA System in an effects
loop of an amp, the “Effects Loop Send” should be
connected to the NOVA System Line In. Then the NOVA
System pre-amp section is bypassed and you use the
preamp section of your amp for drive.
3/4 - Balanced Outputs
Balanced outputs on 1/4” TRS jack. Use the left output if
you do not play in stereo and connect to a single amp.
5 / 6 / 7 - MIDI In / Thru / Out
Standard MIDI interface.
REAR PANEL VIEW
8 - Pedal In
Several types of external pedals can be connected and
used to control parameters.
- Connect a G-Switch for preset change and thereby
utilize all 8 switches on NOVA System as effects
bypass switches.
- Connect an expression control e.g. volume.
For perfect response when using an expression
pedal, the pedal must be calibrated. This is done via
the pedal menu.
- Via the pedal menu you can set up which parameter
the expression pedal should control.
9 - Power In
The switchmode power-supply accepts from 100 to 240
VAC.