TC Electronic Nova System - Manual (Page 19)

19
MENU - UTILITY
The NOVA System EQ section is not available
when SpeakerSim is invoked.
Always set the SpeakerSim parameter to “off” when
plugging the NOVA System outputs into a regular
guitar amplifier. Otherwise you will have both a
speaker and a filter emulating a speaker at the
same time. With this combination you will most
likely find your gear sounding dull.
Footswitch
Range: Pedal or Preset
Pedal mode:
In pedal mode all footswitches act as effects on/off
switches (+Tap tempo). Pretty much as a you would use
eight regular stomp box pedals. However, it is still
possible to change both preset banks and presets when
in this mode.
Changing presets:
- press and hold one of the three preset switches.
Changing banks:
- press and hold one of the two left-most buttons (MOD
or PITCH). The three preset buttons and the MOD
and PITCH switches will blink indicating that you are
in bank select mode.
- Now either tap MOD or PITCH to step through preset
banks one at a time or hold on of the switched to
scroll up/down.
Preset mode (default setting):
In preset mode you recall presets by pressing one of the
three preset switches. Preset banks are selected as
described in the paragraph “changing banks”.
Pedal mode - with G-Switch connected:
With a G-Switch connected to Pedal In on the rear panel,
this switch can be used to recall presets. This way you
can use all seven effects on/off switches for effects
bypass and use the G-Switch for instant preset recall.
We think this is the “best of both worlds”.
The G-Switch must be selected as pedal type in the
pedals menu.
View Angle
Adjust to get the best display viewing angle.
Clear System
Clear system will set NOVA System back to factory
default settings. - Press MENU to execute and confirm.