Important safety instructions – TC Electronic Nova System User Manual

Page 2

Advertising
background image

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

• This equipment should be installed near the socket

outlet and disconnection of the device should be easily

accessible.

• To completely disconnect from AC mains, disconnect the

power supply cord from the AC receptacle.

• The mains plug of the power supply shall remain readily

operable.

• Do not install in a confined space.

• Do not open the unit – risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not

expressly approved in this manual could void your authority to

operate this equipment.

Service

• There are no user-serviceable parts inside.

• All service must be performed by qualified personnel.

Warning!

• To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture and objects filled with

liquids, such as vases, should not be placed on this

apparatus.

• This apparatus must be earthed.

• Use a three wire grounding type line cord like the one

supplied with the product.

• Be advised that different operating voltages require the use

of different types of line cord and attachment plugs.

• Check the voltage in your area and use the correct type.

See table below:

Voltage

Line plug according to standard

110-125V UL817 and CSA C22.2 no 42.
220-230V CEE 7 page VII, SR section

107-2-D1/IEC 83 page C4.

240V

BS 1363 of 1984.

Specification for 13A fused

plugs and switched and

unswitched socket outlets.

The lightning flash with an arrowhead symbol within

an equilateral triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

a

Advertising