TC Electronic Nova System - Manual (Page 23)

23
MIDI CC menu
This menu allows for external MIDI control of effects
on/off, tap tempo function and real-time control of the
parameter assigned to the expression pedal.
Basics
• Press MENU
• Select MIDI CC and press MENU
• Select parameters using encoder D
• Set MIDI CC values using encoder A, B or C
MIDI CCs
For each function you can set a MIDI Cc (control
change) number. This is the number the external device
must address followed by a value to control the
parameter.
Controllable parameters:
Parameter Menu Name Values
Tap Tempo Tap Tempo : Off, MIDI CC 0 to 127
Drive DRV Off/On : Off, MIDI CC 0 to 127
Compressor CMP Off/On : Off, MIDI CC 0 to 127
Noise Gate NG Off/On : Off, MIDI CC 0 to 127
EQ EQ Off/On : Off, MIDI CC 0 to 127
Boost BST Off/On : Off, MIDI CC 0 to 127
Modulation MOD Off/On : Off, MIDI CC 0 to 127
Pitch PIT Off/On : Off, MIDI CC 0 to 127
Delay DLY Off/On : Off, MIDI CC 0 to 127
Reverb REV Off/On : Off, MIDI CC 0 to 127
Expr. pedal Exp Pedal : Off, MIDI CC 0 to 127
MIDI