Ironwood Electronics GHz socket Assembly Instructions - Manual (Page 4)

Page 4 of 4
GFI.doc, Rev.A, Created by E Smolentseva, 10/22/03
Tel: (800) 404-0204
www.ironwoodelectronics.com
Vacuum pen:
A vacuum pen is recommended for
insertion/extraction of ICs having a body size of
8x8mm or larger. Figure 2 shows a typical
vacuum pen. This part, TL-VACUUMPEN-01,
may be purchased separately.
Tweezers:
A small tweezers is recommended for
insertion/extraction of ICs having a body size of
7x7mm or smaller. Figure 3 shows a typical
small tweezers with a GHz BGA socket.
Figure 3: Tweezers with SG-BGA socket
Figure 2: Vacuum Pen with attachments