Ironwood Electronics SMT adaptor + GHZ BGA Socket - Assembly Instructions - Manual (Page 2)

DETAIL A
PATTERN OFFSET
(CLOSER TO RIGHTSIDE
TOOLING HOLES)
NOTE: WHEN PLACING SOCKET BASE ASSEMBLY,
ORIENTATION MARK SHOULD BE ON THE UPPER
LEFT CORNER AS SHOWN IN THE TOP VIEW.
Socket Base
Orientation Mark
Top View
Side View
Offset
© 2002 IRONWOOD ELECTRONICS, INC.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Page 2 of 2
GH
Z
BGA Socket and SMT adaptor
Assembly Instructions
Filename: SAI.mcd, Rev A, 8/14/02, IP