Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 287)

UAD Powered Plug-Ins Manual - 287 - Chapter 28: Neve 88RS Channel Strip
Phase The Phase (Ø) button inverts the polarity of the signal. The signal is
inverted when the button is gray and the red indicator illuminates.
Leave the button inactive (unlit) for normal phase.
Output The Output knob controls the signal level that is output from the
plug-in. The default value is 0 dB. The available range is ±20
dB.
Power The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plug-in to reduce the UAD DSP load (load is not
reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
Note: You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
The Neve 88RS at Skywalker Sound in California