Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 372)

UAD Powered Plug-Ins Manual - 372 - Chapter 38: Precision Multiband
Band Controls
The Band Controls contain the parameters that
are used to specify all the settings for each
band (except the frequencies; see
“Frequency
Controls” on page 379 ).
The Band Controls for each of the five bands
are identical.
Only one set of Band Controls is displayed at a
time. The control set for any particular band is
displayed by selecting the band (see
“Band Se-
lect” on page 372 ).
Band Select Selecting a band causes the controls for that band to be displayed in the Band
Controls area. Bands can be selected by using the Band Select buttons, or by
clicking in the EQ display.
Band Select Buttons
The Band Select buttons at the top of the EQ Display specify which band pa-
rameters are displayed in the band controls section. Click the button to dis-
play the parameters for the band.