Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 363)

UAD Powered Plug-Ins Manual - 363 - Chapter 36: Precision Limiter
Hold The meter Hold Time switch determines how much time will pass before the
peak values for the main meter and the gain reduction meter are reset. It af-
fects both the peak LED’s and the peak text display.
Values of 3 seconds, 10 seconds, or Infinite (indicated by the lazy-8 symbol)
can be selected.
Clear The meter Peak Clear switch clears the meter peak value display. It affects
both the peak LED’s and the peak text display.
Precision Limiter Latency
The Precision Limiter has a 1.5ms look-ahead window to ensure clipping does
not occur. This look-ahead function results in a slightly larger latency than
other UAD plug-ins. See Chapter 9 “UAD Delay Compensation” in the UAD
System Manual for more information.
Note: Compensating for Precision Limiter is not required if the host applica-
tion supports full plug-in delay compensation throughout the signal path, or
when it is used only on the outputs.