Master eq, Interior, Information – Universal Audio UAD Plug-Ins ver.7.5 User Manual
Page 308: Load progress led, Microphones
UAD Powered Plug-Ins Manual
- 308 -
Chapter 29: Ocean Way Studios
The locations of the source and microphones within the room are determined
by the Source and Distance parameters.
Note:
Microphones that are muted are not shown in the Position Display
Panel.
Master EQ
The Master EQ panel displays the state of the Master EQ settings. When the
Master EQ is disabled (or when both Master EQ Gain values are zero), the
frequency spectrum is flat.
Interior
The Interior panel displays a photograph of the currently selected studio. This
panel is a helpful static background when visual feedback is undesirable.
Information
This panel displays information about the currently selected studio and micro-
phone(s). General information is displayed initially; when the studio or micro-
phones are changed, text in the panel is updated with information about the
selection.
Load Progress
LED
The Load Progress LED flashes
when the plug-in is updating
the impulse response, which
is triggered whenever the Stu-
dio, Source, Mic Select, or
Mic Filter controls are modified. The new control settings are not heard until
the LED stops flashing. Sonic artifacts and/or host CPU increases may occur
during IR updating. See
Note that studio and source changes take longer than microphone changes,
because these changes update all three microphone pairs, while microphone
changes update only one microphone pair.
Microphones
The Near, Mid, and Far microphone pairs each have their own set of con-
trols. The control set for each mic is identical. See