Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 349)

UAD Powered Plug-Ins Manual - 349 - Chapter 35: Precision K-Stereo Ambience Recovery
Ambience Filters
The Ambience Filters (EQ) provide for frequency adjustments to the ambient
portion of the signal. These controls do not affect the direct (dry) portion of the
signal.
The Ambience Filters consist of one Low Cut filter, one High Cut filter, and a
single-band parametric bell filter.
Note: Controls in the Ambience Filters section have no effect unless the Re-
cover Enable switch is engaged.
Refer to Figure 105 below for the controls in this section.
EQ Enable The EQ switch enables/disables the Ambience Filters. This switch can only be
engaged when the Recover Enable switch is engaged.
Cut Filters The Low Cut and High Cut filters have a slope of 12 dB per octave. Each Cut
Filter can be independently disabled by setting it to the OFF position (the de-
fault value).
Low Cut
The available range is 20 Hz to 1 kHz.
High Cut
The available range is 5 kHz to 20 kHz.
Figure 105. Ambience Filters controls