Universal Audio UAD Plug-Ins ver.7.5 - Manual (Page 391)

UAD Powered Plug-Ins Manual - 391 - Chapter 39: Pultec Passive EQ Collection
HF Boost
This knob controls sets the amount of gain for the high frequency portion of the
equalizer.
High
Attenuation
Controls
HF Attenuation Frequency
This switch (“ATTEN SEL”) determines the frequency of the high fre-
quency attenuator. Three frequencies are available: 5, 10, and
20 KCS.
Tip: To cycle through the available values, click the “ATTEN SEL”
text label, or shift+click the text label to cycle through available
values in reverse. These shortcuts are unavailable with the Legacy version of
the plug-in.
HF Attenuation
This knob (“ATTEN”) determines the amount of high shelf cut to be applied to
the frequency set by the Attenuation Selector switch.
Pultec MEQ-5 Controls
The MEQ-5 can control three frequency bands simultaneously, using three
groups of interacting parameters.
The first group adjusts the low–mid frequencies and has two controls: fre-
quency select and boost. The second group adjusts the mid frequencies and
has two controls: frequency select and attenuation. The third group adjusts
high-mids and has two controls: frequency select and boost. The placement
and grouping of the sections and their related controls are shown in
Figure 119 .
Figure 119. Control grouping within the Pultec MEQ-5