SCANTECH ID (Champtek company) SG300RFM - Manual (Page 11)

7
Number as keypad data
Once this function is
activated, the output of the
scanning comes from the
numerical pad’s code.
<number as normal data>
Enable STX-ETX
Before displaying a data, this
function will add a STX ASCII
code in front of the data, and
an ETX ASCII code at the end
of the data. This function is
only limited to RS232
interface.
3.3 Reverse Output Characters
Example: 012345Æ543210
Enable
<Disable>
3.4 Upper/Lower Case
<No Change>
The case of the output
characters does not change.
Enable Lower Case
Output
characters in lower case.
The results will be affected by
the keyboard settings. Thus,