SCANTECH ID (Champtek company) SG300RFM - Manual (Page 26)

22
4.6 Code 128
> Check Digit Transmission
Do Not Calculate Check
Digit
Calculate Check Digit and
Transmit
<Calculate Check Digit and
Not Transmit>
>
Append FNC2
“FNC2” is a multi codes-connection function for
Code 128. Sometimes a Code 128 is divided into
two barcodes for large amount of data.
Enable FNC2
“ON” means after reading a
code 128 barcode with FNC2,
you must read the next Code
128 barcode with FNC2 in
order to have a complete
code output.
<Disable FNC2>
means reading only one Code
128 barcode.
>
Setup Code Length
1. Scan the “Set Begin” Bar Code (2 Sets
Available)
2. Go to Decimal Value Table in Appendix A,
scan Bar Code(s) that represents the code
length
3. Scan the Complete Bar Code
Repeat Steps 1-3 to set additional lengths